contact us

    If you would like to leave us a comment please go to

    Contact Us

    contact-clo
    • 3D Transfer System 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System
    • 3D Transfer System

    3D Transfer System

    • Model: JTTR
    • Place origin: China
    • Warranty date: 1 year
    • Installation and debugging: Engineers onsite technical support is available.
    • Package: plywood case/film
    • Price terms: FOB SHENZHEN or other Chinese port etc.
    • Payment terms: T/T, L/C etc.
    • MOQ: 1 set
    • Delivery: 30-60 days

    PRODUCT DETAIL

    Characteristic:

    • 1. The power source is a number of independent servo motor, can keep pace with the punch.
    • 2. With the mistakenly delivery detector loop to ensure the safety of mold and machine.
    • 3 .Each axis movement following the motion by the precise ball screw rod, high accuracy in positioning.
    • 4 .The feeding system can adopt 3 in 1 feeder machine .zigzag feeder machine or double stacker ,rotated stacker.
    • 5. Automation production, it strengthen the safety of operation, raise the capacity and have the products in a stable level, reduce the defect rate and cost greatly.
    • 6. We adopt high grade motion controller and touch-type human computer interface control system, you can make sure the monitor angle when operating and abnormal status can be detected from monitor. It is convenient to input, set and modify each parameter by human-computer interface. Maintenance has been simplified.

    Brief Introduction:

    • 2D transfer system and 3D transfer system were used to produce hardware in large quantity, products need to be processed in several steps, usually need to be banking, deep drawing, bending, piercing, forming etc, especially used in vehicle metal parts producing. Please refer to the following images for reference:
    • 3D Transfer System15
    • 2D transfer system: machine runs in two-dimensional space: X axis and Y axis. It runs 4 action in a circulation: snatch product →horizontal movement →release work piece →return.
    • 3D transfer system: machine runs in three-dimensional space: X axis, Y axis and Z axis. It runs 6 action in a circulation: snatch product →upraise →horizontal movement →come down →release work piece →return.

    Machine Main Configurations

    • 1 For mechanical part: It was designed based on process of product and also need to consider no interference to the mould and press etc when at running. It was driven by several servo motor from YASKAWA/PHASE, lead screw and guide way come from HIWIN, TAIWAN, main rod exported from Germany etc
    • 3D Transfer System16
    • 2 For electrical and electronic parts: It equip with YASKAWA/phase servo motor driver, BECKHOFF motion control unit, SCHNEIDER low voltage components etc.
    • 3D Transfer System17
    • 3D Transfer System18

    Specification

    Model JTTR-150 JTTR-250 JTTR-350 JTTR-450 JTTR-550
    Feed stroke (mm) 0-150 0-250 0-350 0-450 0-550
    Open the folder stroke (mm) 0-200 0-200 0-200 0-200 0-200
    Lifting stroke ??mm?? 0-120 0-120 0-120 0-120 0-120
    Transmission accuracy (mm)   ±0.2 ±0.2 ±0.2 ±0.2 ±0.2
    Min inside  range of transferred rod (mm) 260 300 360 460 560
    Max operating speed (SPM) 40 35 30 25 20
    Max transfer load (kg) 15 20 25 30 30

    * The contents are subject to change without prior notice.

    RELATED PRODUCTS

    Single Process Transfer System
    3D Transfer System
    Multi Process Main Shaft Moving Transfer System
    Multi Process Frame Moving Transfer System
    2D Transfer System
    Independent Manipulator Transfer System

      top
      LinkmanX