contact us

    If you would like to leave us a comment please go to

    Contact Us


    Creating Your Own Stamp Press – A Step-by-Step Guide

    Creating Your Own Stamp Press – A Step-by-Step Guide

    Have you ever wanted to personalize your own stamps but found the cost of a stamp press prohibitive? Why not create your own? This guide will take you through the process of making a DIY stamp press that is both functional and cost-effective.

    Materials Needed:

    • Medium-density fiberboard (MDF)
    • Acrylic sheet
    • Wood screws
    • Washers
    • Drill
    • Sandpaper
    • Stamping block

    Step 1: Cut the MDF and Acrylic

    Start by cutting the MDF into two equal-sized pieces to serve as the base and top of your stamp press. Next, cut the acrylic sheet to fit the size of the MDF pieces.

    Step 2: Drill Holes

    Using a drill, create holes in the MDF where the screws will go. Ensure the holes align on both pieces for accuracy.

    Step 3: Assemble the Stamp Press

    Place the stamping block on the base MDF piece. Sandwich it with the acrylic sheet, then the top MDF piece. Secure all layers together using wood screws and washers.

    Usage Tips:

    • For better precision, place your stamping material on top of the stamp press before securing it.
    • Adjust the pressure by tightening or loosening the screws.
    • Experiment with different materials for stamping to achieve varying results.

    With your homemade stamp press, the possibilities for customization are endless. Get creative and start stamping!

    Disclaimer: Always take necessary safety precautions when working with tools and materials. This guide is for informational purposes only.